Aviation Photo 1068048 Boeing 747 122

Photo of the battery fully automatic assembly production line

3.2.1 Description of the Action Flow： 1. Action process: The stacking robot unloads and unloads materials from the gluing equipment conveyor line, and performs stacking operations in the serial-parallel sequence of the module recipes. This stacking method can flexibly accommodate module combinations with. 1. The design, manufacture and control of the safety fence comply with the relevant national regulations on production safety to ensure the safety of the production process. 2. Protective. The insulation test before welding is conducted by pressing all probes through the overall test mechanism, and then switching between the cell and the cell through the relay. Introduction of pole photo station： 1. This station first takes the MARK point of the module, and then takes each pole; 2. Then bind the photo information with the module code and send it to the laser welding station. 3.7.1 Equipment. 1. Operation process: the tray is lifted and positioned, the shell probe is pressed to the end plate or the side plate, and the positive probe relays of all cells are closed, so there is.