Cellar Cooler Range Technical Manual

What are the specifications of lithium ion rechargeable battery?

This specification describes the definition, technical requirement, testing method, warning and caution of the Lithium ion rechargeable battery. 2. Product Model 3. Basic Specification 4. Visual Inspection There shall be no such defects as remarkable scratches, cracks, bolts, cup cancers, deformations, swelling, leakage. 5. Detailed Specification

What are the specifications of lithium FePO4 rechargeable pack?

This specification describes the type and size, performance, technical characteristics, warning and caution of the 12.8V32Ah LiFePO4 rechargeable pack. 2. Product and Model DOC NO. 3. Battery Pack Specifications Charge mode: CC/CV,Use a constant current, constant voltage(CC/CV) please use special lithium charger.

What are the specifications of battery pack?

Battery Pack Specifications Charge mode: CC/CV,Use a constant current, constant voltage(CC/CV) please use special lithium charger. Charge mode: CC/CV,Use a constant current, constant voltage(CC/CV) please use special lithium charger. heat rejection. Battery test must within 1 month after production. humidity: 65±20%. 5. Characteristics

What voltage should a lithium ion battery be tested at?

Lithium Ion Battery Specifications AA Portable Power Corp. 2. 5V Unless otherwise specified, all tests stated in this document shall be performed at 23±2°C. 3. Performance and test conditions Standard charge: 0.5C=1650mA constant current (CC) charge to 3.65V, followed by 3.65V constant voltage (CV) charge until current taper to ≤0.01C。

What are the problems with lithium batteries?

FEATURES AND DESIGN 1.1The main issue with all lithium batteries is cell overheating and ruptur ng due to over-charging. CHARGEX® Lithium battery systems have several layers of safety redu dancy at the cell level. Notably, an internal thermal fuse between the anode and cathode which shuts down the cell before overheating occurs, to p

What are the requirements for charging a battery?

Battery must be charged with constant current-constant voltage (CC/CV). Charge current must be controlled by specified value in Cell specification. Discharge current must be controlled by specified value in Cell's specification. Cut-off voltage of discharging must be over 2.75V/cell.