Sealed lead acid batteries may be charged by using any of the following charging techniques: 1. Constant Voltage 2. Constant Current 3. Taper Current 4. Two Step Constant Voltage To obtain maximum battery service life and capacity, along with acceptable recharge time and economy, constant voltage-current. During constant voltage or taper charging, the battery's current acceptance decreases as voltage and state of charge increase. The battery is fully charged once the current stabilizes at a low level for a few hours. There are two. Selecting the appropriate charging method for your sealed lead acid battery depends on the intended use (cyclic or float service), economic considerations, recharge time, anticipated. Constant current charging is suited for applications where discharged ampere-hours of the preceding discharge cycle are known. Charge time and charge quantity can easily be calculated,. Constant voltage charging is the best method to charge sealed lead acid batteries. Depending on the application, batteries may be charged either on a continuous or non.
