Related Topics:
Battery Manufacturers Europe-
10 mw battery storage
A 10 MW battery storage system is a grid-scale energy storage solution that can store up to 10 megawatts of electricity for use at a later time. These systems are usually made up of lithium-ion batteries, which are known for their high energy density and long cycle life.
-
How much power does a 10 volt lead-acid battery have
The lead–acid battery is a type of first invented in 1859 by French physicist. It is the first type of rechargeable battery ever created. Compared to modern rechargeable batteries, lead–acid batteries have relatively low. Despite this, they are able to supply high. These features, along with their low cost, make them attractive for u.
FAQs about How much power does a 10 volt lead-acid battery have
What voltage should a 12V lead acid battery be charged?
The ideal charging voltage for a 12V lead acid battery is between 13.8V and 14.5V. Charging the battery at a voltage higher than this range can cause the battery to overheat and reduce its lifespan. How does temperature affect lead acid battery voltage levels? Temperature affects lead acid battery voltage levels.
What is a lead acid battery voltage chart?
A lead acid battery voltage chart is crucial for monitoring the state of charge (SOC) and overall health of the battery. The chart displays the relationship between the battery's voltage and its SOC, allowing users to determine the remaining capacity and when to recharge.
What volts should a lead acid battery be at rest?
A battery at 10.5 - 10.8 volts at rest is probably damaged. A lead acid battery should never be below 11.80 volt at rest. ↩ 'bad' battery protection solutions will just start to oscillate as the battery voltage recovers (above the cut-off threshold) when the load is removed.
What is the voltage of a lead-acid battery?
The voltage of a lead-acid battery also varies with temperature. At room temperature, the voltage of a fully charged lead-acid battery is around 12.6 volts. As the temperature of the battery decreases, the voltage of the battery also decreases. Similarly, as the temperature of the battery increases, the voltage of the battery also increases.
When is a lead acid battery fully charged?
A lead acid battery is considered fully charged when its voltage level reaches 12.7V for a 12V battery. However, this voltage level may vary depending on the battery's manufacturer, type, and temperature. What are the voltage indicators for different charge levels in a lead acid battery?
What is the C-rate of a lead acid battery?
It turns out that the usable capacity of a lead acid battery depends on the applied load. Therefore, the stated capacity is actually the capacity at a certain load that would deplete the battery in 20 hours. This is concept of the C-rate. 1C is the theoretical one hour discharge rate based on the capacity.
-
Top 10 Chinese Energy Storage Battery Companies
This article will focus on top 10 battery energy storage manufacturers in China including SUNWODA, CATL, GOTION HIGH TECH, EVE, Svolt, FEB, Long T Tech, DYNAVOLT, Guo Chuang, CORNEX.
FAQs about Top 10 Chinese Energy Storage Battery Companies
Who are the top 10 battery energy storage manufacturers in China?
This article will focus on top 10 battery energy storage manufacturers in China including SUNWODA, CATL, GOTION HIGH TECH, EVE, Svolt, FEB, Long T Tech, DYNAVOLT, Guo Chuang, CORNEX, explore how they stand out in the fierce market competition and lead the industry forward. SUNWODA, founded in 1997, is a global leader in lithium-ion batteries.
Who are the top China Energy Storage companies?
This report lists the top China Energy Storage companies based on the 2023 & 2024 market share reports. Mordor Intelligence expert advisors conducted extensive research and identified these brands to be the leaders in the China Energy Storage industry. Contemporary Amperex Technology Co., Limited. Contemporary Amperex Technology Co., Limited.
Which energy storage system ranked first in China in 2022?
In 2022, shipments of KELONG user-side energy storage systems ranked first in China, and shipments of energy storage PCS ranked fourth in the world and second in China. In 2023, it delivered the largest optical storage power station in Brazil and Gansu, Hubei, Guizhou, Guangdong and other places in China.
Is China a leader in lithium-ion battery energy storage?
China, as one of the leaders in the world's new energy industry, has gathered many companies that are deeply engaged in the field of lithium-ion battery energy storage and have advanced technology.
What are the top 5 Chinese energy storage system (DC) companies?
In the global market in 2023, the top five Chinese companies shipment in terms of energy storage system (DC) were: BYD, Yuanxin Energy Storage, Jingkong Energy, Zhongtian Energy Storage, and Kunyu Power. Figure: Top 5 Chinese Energy Storage System (DC) companies in the Global Market in 2023, unit: MWh
What are the top 10 energy storage systems integrators in China?
In 2019, among new operational electrochemical energy storage projects in China, the top 10 energy storage system integrators in in terms of installed capacity were Sungrow, CLOU Electronics, Hyperstrong, CUBENERGY, Dynavolt Tech, Narada, Shanghai Electric Guoxuan, Ray Power, Zhiguang Energy Storage, and NR Electric.
-
Swiss energy storage battery manufacturers recommend
Other prominent battery companies in Switzerland include Swissbit, a manufacturer of memory and storage solutions for industrial applications, and Batemo, which designs and produces custom battery systems for various industries.
-
Europe Lead-acid Battery Cabinet Grid-connected Type
The ESS-GRID Cabinet series are outdoor battery cabinets for small-scale commercial and industrial energy storage, with four different capacity options based on different cell compositions, 200kWh, 215kWh, 225kWh, 241kWh, etc.
-
China Battery Cabinet Manufacturers
Explore top battery cabinet manufacturers in China, key types, components, trends, and tips to choose reliable, cost-effective energy storage solutions.
-
Lead-acid battery brand ranking of all manufacturers
Top 5 Lead-Acid Battery Manufacturers1. Clarios (formerly Johnson Controls) Clarios is the former power solutions division of Johnson Controls—following the sale of the unit to private equity firm Brookfield Business Partners LP. Clarios is the leading aftermarket and original equipment (OE) supplier with the broadest portfolio of batteries.
FAQs about Lead-acid battery brand ranking of all manufacturers
What are the top ranked lead acid battery companies?
Also, please take a look at the list of 11 lead acid battery manufacturers and their company rankings. Here are the top-ranked lead acid battery companies as of January, 2025: 1.Concorde Battery Corporation, 2.Power Sonic, 3.DYNAMIS Batterien GmbH.
What is the global lead acid battery market value?
The global lead acid battery market reached a value of US$ 34.3 Billion in 2023. Lead acid batteries are rechargeable energy storage devices comprising an anode and cathode as positive and negative terminals. They are connected by the electrolyte to generate electricity through electrochemical reactions.
What is the largest lead-acid battery market?
In terms of application, Automotive Starter is the largest market, with a share over 53%. This report is a detailed and comprehensive analysis for global Lead-acid Battery market. Both quantitative and qualitative analyses are presented by manufacturers, by region & country, by Type and by Application.
Who are the major players in the automotive lead-acid battery market?
Exide Technologies Inc., GS Yuasa International Ltd, Panasonic Corporation, and Leoch International Technology Limited Inc, among others, are the major players in the global automotive lead-acid battery market. The global automotive lead-acid battery market is expected to grow at a CAGR of about 3.2 % in the forecast period of 2022-2027.
What is the global automotive lead-acid battery market value in 2023?
The global automotive lead-acid battery market reached a value of US$ 13.3 Billion in 2023. As per the analysis by IMARC Group, the leading companies in the automotive lead-acid battery market are engaged in product innovations to expand their product portfolio.
Who are the key players of lead-acid battery (lead-acid batteries)?
Global key players of Lead-Acid Battery (Lead-Acid Batteries) include Clarios, Tianneng Holding Group, Chilwee, Exide Technologies, CSB Energy Technology, GS Yuasa, EnerSys and East Penn Manufacturing, etc. Top five players occupy for a share about 44%.
-
What is the concept of the new battery project
The EU-funded FIVEVB project, which ends in April 2018, is developing an advanced high-energy Li-ion battery based on cell chemistry developed from scratch up to industrial prototype level.
FAQs about What is the concept of the new battery project
What is the future of battery production in the UK?
'UK Electric Vehicle and Battery Production Potential to 2040.' 2022. ↩ McKinsey Battery Insights Team. ' Battery 2030: Resilient, Sustainable and Circular.' 2022. ↩ HM Government. ' Transitioning to zero emission cars and vans: 2035 delivery plan. ' 2021. ↩
How will battery 2030+ impact chemistry-neutral chemistry?
and design batteries. Thanks to its chemistry-neutral approach, BATTERY 2030+ has an impact not only on current lithium-based battery chemistries, but also on all other types of batteries, including redox flow batteries and on still unknown future battery chemi
What is the role of battery 2030+?
SO and IEC. SummaryEurope is presently creating a strong battery research and innovation ecosystem community where BATTERY 2030+ has the role to provide a roadmap for long-term research for future battery technologies. LIBs still dominate the market for high-energy-density r
Why is battery technology important?
battery technologies. This has resulted in a leading position regarding active materials development, the design of new liquid or solid electrolytes, development beyond LIB chemistries, as well as new experimental and computational tools to understand complex redox reactions at the heart of these electrochemical systems, to name but
What is battery manufacturing?
Battery manufacturing, as well as related upstream and downstream activities, is energy intensive and necessitates large power connections.
What role do batteries play in our energy transition?
Batteries will play an essential role in our energy transition and our ability to successfully achieve net zero by 2050. High capacity and reliable rechargeable batteries are a critical component of many devices, modes of transport, and our evolving energy generation capability.
-
Is magnesium battery considered a new energy battery
Magnesium batteries are batteries that utilize cations as charge carriers and possibly in the anode in. Both non-rechargeable and rechargeable chemistries have been investigated. Magnesium primary cell batteries have been commercialised and have found use as reserve and general use batteries. Magnesium secondary cell batteries are an active research topic as a possible replacement or i.
FAQs about Is magnesium battery considered a new energy battery
Are magnesium batteries rechargeable?
Magnesium batteries are batteries that utilize magnesium cations as charge carriers and possibly in the anode in electrochemical cells. Both non-rechargeable primary cell and rechargeable secondary cell chemistries have been investigated.
Are magnesium secondary cell batteries better than lithium ion based batteries?
Magnesium secondary cell batteries are an active research topic as a possible replacement or improvement over lithium-ion–based battery chemistries in certain applications. A significant advantage of magnesium cells is their use of a solid magnesium anode, offering energy density higher than lithium batteries.
Are magnesium batteries more energy dense than lithium-ion batteries?
“The theoretical energy density [of magnesium batteries] is at least comparable to lithium-ion batteries, and there is the potential to realize a higher energy density than lithium because there are double the electrons for every individual magnesium ion, compared to lithium,” he said.
Could magnesium batteries power EVs?
With relatively low costs and a more robust supply chain than conventional lithium-ion batteries, magnesium batteries could power EVs and unlock more utility-scale energy storage, helping to shepherd more wind and solar energy into the grid. That depends on whether or not researchers can pick apart some of the technology obstacles in the way.
Are magnesium batteries still a thing?
Magnesium batteries have been talked up quite a bit since the early 2000s. They dropped off the CleanTechnica radar about five years ago, but some key advances are beginning to crop up, and now would be a good time to catch up (see our magnesium archive here).
Are magnesium-based batteries a good alternative to lithium-ion batteries?
Magnesium-based batteries are therefore an attractive alternative to other batteries, such as lithium-ion, vanadium-redox flow, NaS, ZEBRA batteries. Magnesium has several positive attributes. First, it is cheaper than lithium, and 6 th most earth abundant metal.
-
How much silver does lithium iron phosphate battery contain
The lithium iron phosphate battery (LiFePO 4 battery) or LFP battery (lithium ferrophosphate) is a type of lithium-ion battery using lithium iron phosphate (LiFePO 4) as the cathode material, and a graphitic carbon electrode with a metallic backing as the anode. Because of their low cost, high safety, low toxicity, long cycle life and other factors, LFP batteries are findi. LiFePO 4 is a natural mineral known as. and first identified the polyanion class of cathode materials for. LiFePO 4 was then identified as a cathode material. • Cell voltage • Volumetric = 220 / (790 kJ/L)• Gravimetric energy density > 90 Wh/kg (> 320 J/g). Up to 160 Wh/kg (580 J/g). Latest version announced in end of 2023, early 2024 made significant improvements in. The LFP battery uses a lithium-ion-derived chemistry and shares many advantages and disadvantages with other lithium-ion battery chemistries. However, there are significant differences. Iron and phosph.
[PDF Version]
FAQs about How much silver does lithium iron phosphate battery contain
What are lithium iron phosphate batteries?
Lithium iron phosphate batteries are a type of rechargeable battery made with lithium-iron-phosphate cathodes. Since the full name is a bit of a mouthful, they're commonly abbreviated to LFP batteries (the “F” is from its scientific name: Lithium ferrophosphate) or LiFePO4.
Are lithium-iron-phosphate batteries better than Li-ion batteries?
Lithium-iron-phosphate (LFP): LFP batteries are becoming popular in EVs from European manufacturers. They contain no cobalt, instead using iron and phosphate, which are cheaper, more abundant materials in the earth. The batteries have less energy density, but better thermal safety than a typical li-ion battery.
Are lithium iron phosphate batteries safe?
But taken overall, lithium iron phosphate battery lifespan remains remarkable compared to its EV alternatives. While studies show that EVs are at least as safe as conventional vehicles, lithium iron phosphate batteries may make them even safer.
What is lithium iron phosphate (LFP) battery?
Lithium Iron Phosphate (LiFePO4 or LFP) batteries are a type of rechargeable lithium-ion battery known for their high energy density, long cycle life, and enhanced safety characteristics. Lithium Iron Phosphate (LiFePO4) batteries are a promising technology with a robust chemical structure, resulting in high safety standards and long cycle life.
Are nickel-based batteries better than lithium iron phosphate batteries?
In fact, nickel-based chemistries accounted for 80% of the battery capacity deployed in new plug-in EVs in 2021. Lithium iron phosphate (LFP) batteries do not use any nickel and typically offer lower energy densities at better value.
Do lithium phosphate batteries use nickel?
Lithium iron phosphate (LFP) batteries do not use any nickel and typically offer lower energy densities at better value. Unlike nickel-based batteries that use lithium hydroxide compounds in the cathode, LFP batteries use lithium carbonate, which is a cheaper alternative.
-
RV lithium iron phosphate battery cabinet installation
Before we start talking about the installation process, there are some simple truths we want to cover that prove lithium batteries are good for RVs. There's a lot of information floating around and many different versions of lithium-ion batteries in the marketplace. Unfortunately, many people can't talk about these. You need to know some other simple truths to determine the lithium battery size you need for your travel trailer or motorhome. Most RVs on the road today use Group 27 batteries. Some of the Classic Era(1971-1989) or. YES, 30-amp RVs can use lithium batteries. RV manufacturers install two 6-volt batteries as a precaution. If one goes bad, there's another in. To determine how many lithium-ion batteries you need for your RV, you have to think about your electrical needs. Every electronic device requires a certain amount of watts/amp. Most RVers want to know how to increase the capacity of their RV batteries. It's been hard to find a campsite during the Remote Period of the Modern Era's(2020- Present) RV boom. Dry camping has become a substitute for.
[PDF Version]
FAQs about RV lithium iron phosphate battery cabinet installation
Can I install lithium batteries in my RV?
Upgrading to lithium batteries in your RV can significantly enhance your power system's efficiency and reliability. This guide provides a comprehensive, step-by-step installation process to help you transition smoothly from traditional lead-acid batteries to advanced lithium technology. To install lithium batteries in your RV:
How to install LiFePO4 batteries in an RV?
Installing LiFePO4 batteries in an RV is a simple process that can be completed in a few easy steps. 1. Begin by disconnecting the negative terminal of your RV's lead-acid battery. 2. Next, remove the vent caps from the LiFePO4 batteries and connect the positive terminal of the first battery to the negative terminal of the second battery. 3.
Do you need a lithium iron phosphate-oxide battery for your RV?
For your RV, you need a lithium iron phosphate-oxide battery known as LiFePO4. At some point during your battery search, maybe you Googled “LiFePO4 RV batteries” and balked at the price point. Don't close the door on them just yet. Let us explain why they're actually a better investment than lead acid.
Are RV lithium batteries safe?
Lithium battery technologies have drastically improved, and RV lithium batteries have become safer. Manufacturers often install a built-in battery management system (BMS) that monitors the status of the battery. It can shut the battery down if the temperature, voltage, or current reach unsafe parameters.
How do you charge a lithium RV battery?
When you upgrade to lithium batteries in your RV, you'll have several options for charging them. One standard way to replenish them is by plugging your RV into an electrical outlet and letting the onboard converter charge the batteries. Upgrade to lithium RV batteries to make your boondocking and off-grid camping experiences easier.
Do RV solar panels work with lithium-ion batteries?
So, let's clear some things up: RV solar systems work best with lithium-ion batteries, but you can use lithium batteries without solar panels. Your RV generator, tow vehicle's umbilical cord, or motorhome's alternator can charge them just like the lead-acid batteries you currently use.
-
What are the battery pack management software
A BMS may monitor the state of the battery as represented by various items, such as: • : total voltage, voltages of individual cells, or voltage of periodic taps • : average temperature, coolant intake temperature, coolant output temperature, or temperatures of individual cells.
FAQs about What are the battery pack management software
What is a battery management system?
(See Simscape Battery example.) A battery management system oversees and controls the power flow to and from a battery pack. During charging, the BMS prevents overcurrent and overvoltage. The constant-current, constant-voltage (CC-CV) algorithm is a common battery charging approach used in a battery management system.
What is a battery management system for Li-ion battery packs?
Let's take a look at some of the most critical uses of a battery management system for Li-ion battery packs: Cell Monitoring: One of the fundamental uses of a battery management system is that it allows complete monitoring of the voltage, current, temperature, and sometimes other parameters of individual battery cells within a pack.
What is battery management software?
Battery management software (BMS) is a critical application for electric vehicles that monitors an EV's battery to achieve the highest possible performance, increase the battery's longevity and provide essential safety functions.
What makes a good battery management system?
A sophisticated battery management system needs to consist of a number of individual components that work in unison. Bosch takes it a step further and ensures the most comprehensive battery management system available, encompassing a myriad of exceptional design and development services.
What is a battery management system (BMS) for electric vehicles?
A battery management system (BMS) for electric vehicles is a crucial component that ensures the optimal performance, safety, and longevity of the vehicle's battery pack.
What is a smart battery pack?
A battery pack built together with a battery management system with an external communication data bus is a smart battery pack. A smart battery pack must be charged by a smart battery charger. A BMS may monitor the state of the battery as represented by various items, such as:
-
How toxic are lithium battery chemical materials
Lithium is used for many purposes, including treatment of bipolar disorder. While lithium can be toxic to humans in doses as low as 1.5 to 2.5 mEq/L in blood serum, the bigger issues in lithium-ion batteries arise from the organic solvents used in battery cells and byproducts associated with the sourcing and. Much of the world's lithium is extracted by tapping into underground “brine” deposits, pumping water rich in lithium salts into large evaporation ponds. Approximately 500,000 gallons of. Lithium isn't the only problematic metal in lithium-ion batteries. Cobalt, which can constitute a significant amount of the cathode material, is toxic when inhaled or consumed at above. The organic liquids used in most electrolyte formulations are both mildly toxic when ingested and can irritate the eyes and skin. Inhaling their vapors may cause nausea, vomiting,. The cathode material in some high-density lithium-ion batteries includes as much as 80% nickel. Coal-fired nickel smelters, such as the ones found in Indonesia, release carcinogenic.
[PDF Version]
FAQs about How toxic are lithium battery chemical materials
Are lithium ion batteries toxic?
Lithium-ion batteries have potential to release number of metals with varying levels of toxicity to humans. While copper, manganese and iron, for example, are considered essential to our health, cobalt, nickel and lithium are trace elements which have toxic effects if certain levels are exceeded .
Are spent lithium-ion batteries a pollution hazard?
The remarkable accumulation of Li and heavy metals in anode of spent LIBs was found. Present regulations regarding the management and recycling of spent Lithium-ion batteries (LIBs) are inadequate, which may lead to the pollution of lithium (Li) and heavy metals in water and soil during the informal disposal of such batteries.
Are lithium ion batteries flammable?
Some of these electrolytes are flammable liquids and requirements within OSHA's Process Safety Management standard may apply to quantities exceeding 10,000 lb. Many of the chemicals used in lithium-ion battery manufacturing have been introduced relatively recently.
How can lithium-ion batteries prevent workplace hazards?
Whether manufacturing or using lithium-ion batteries, anticipating and designing out workplace hazards early in a process adoption or a process change is one of the best ways to prevent injuries and illnesses.
Are lithium-ion batteries a fire hazard?
Lithium-ion batteries (LIBs) present fire, explosion and toxicity hazards through the release of flammable and noxious gases during rare thermal runaway (TR) events. This off-gas is the subject of active research within academia, however, there has been no comprehensive review on the topic.
What happens if you eat lithium ion batteries?
Exposure to ionic lithium, which is present in both anode material and electrolyte salts, has both acute and chronic health effects on the central nervous system. Lithium isn't the only problematic metal in lithium-ion batteries.
-
How to take out the battery pack
In this video, we'll guide you through the process of removing the internal battery pack from your battery. Our clear, step-by-step instructions will help yo.
FAQs about How to take out the battery pack
How do you remove a battery pack?
For detailed instructions, watch a video tutorial. Next, locate and remove the screws on the battery pack casing. Typically, these screws are small and require careful handling. Gently use the prying tool to separate the casing without damaging the clips. Once the casing is open, you will see the individual cells inside the battery pack.
How do I disassemble and install a new battery pack?
Here's how to disassemble and install a new battery pack for your device. 1️⃣ Remove the Old Battery: Locate the battery pack release button on your device. Press the release button and slide the battery pack to the right. Gently pull the battery pack out of the device.
Should you disassemble a lithium-ion battery pack?
This is why it's a good idea to disassemble lithium-ion battery packs for its cells. In most other cases, just a single cell has failed. Remember, battery packs are made of many cells that are grouped in a specific way. So, if one cell dies, it will bring down the cells that it is immediately attached to.
How do you remove a battery from a car?
Either way, it's something to avoid. Step 1: The very first step is to remove all supporting wires and other connections to the battery. Whatever the main battery pack is electrically connected to, remove it. Remove any circuit boards, regulators, lights, wires, or anything else there is, and get it down to the raw battery pack.
How do I fix a bad battery pack?
First, you need to figure out what's wrong with the pack—either bad cells or a wonky Battery Management System (BMS). If it's the BMS, just swap it out with a new one. The BMS keeps an eye on the battery pack's performance and makes sure everything's working within safe limits. Replace the bad BMS, and your battery pack should be good to go.
What happens if a battery pack dies?
Remember, battery packs are made of many cells that are grouped in a specific way. So, if one cell dies, it will bring down the cells that it is immediately attached to. This is bad news for the cells in that group but it's good news for the rest of the battery pack. It generally means that the other cell groups are just fine.
-
Lithium battery pack technical specifications
This article will introduce the specifications, sizes, and parameters of lithium battery pack in detail, including standard specifications, voltage capacity, cycle life, etc.
FAQs about Lithium battery pack technical specifications
What are the specifications of lithium ion rechargeable battery?
This specification describes the definition, technical requirement, testing method, warning and caution of the Lithium ion rechargeable battery. 2. Product Model 3. Basic Specification 4. Visual Inspection There shall be no such defects as remarkable scratches, cracks, bolts, cup cancers, deformations, swelling, leakage. 5. Detailed Specification
What are the specifications of lithium FePO4 rechargeable pack?
This specification describes the type and size, performance, technical characteristics, warning and caution of the 12.8V32Ah LiFePO4 rechargeable pack. 2. Product and Model DOC NO. 3. Battery Pack Specifications Charge mode: CC/CV,Use a constant current, constant voltage(CC/CV) please use special lithium charger.
What are the specifications of battery pack?
Battery Pack Specifications Charge mode: CC/CV,Use a constant current, constant voltage(CC/CV) please use special lithium charger. Charge mode: CC/CV,Use a constant current, constant voltage(CC/CV) please use special lithium charger. heat rejection. Battery test must within 1 month after production. humidity: 65±20%. 5. Characteristics
What voltage should a lithium ion battery be tested at?
Lithium Ion Battery Specifications AA Portable Power Corp. 2. 5V Unless otherwise specified, all tests stated in this document shall be performed at 23±2°C. 3. Performance and test conditions Standard charge: 0.5C=1650mA constant current (CC) charge to 3.65V, followed by 3.65V constant voltage (CV) charge until current taper to ≤0.01C。
What are the problems with lithium batteries?
FEATURES AND DESIGN 1.1The main issue with all lithium batteries is cell overheating and ruptur ng due to over-charging. CHARGEX® Lithium battery systems have several layers of safety redu dancy at the cell level. Notably, an internal thermal fuse between the anode and cathode which shuts down the cell before overheating occurs, to p
What are the requirements for charging a battery?
Battery must be charged with constant current-constant voltage (CC/CV). Charge current must be controlled by specified value in Cell specification. Discharge current must be controlled by specified value in Cell's specification. Cut-off voltage of discharging must be over 2.75V/cell.