Vanuatu Battery Storage Off Grid

How do I remove the back cover of the battery?

To remove the back cover of the battery, first refer to the instructions under the title 'Removing the back cover.'

How do I reinstall my sunvault battery?

Use a #2 flathead screwdriver to remove the six screws from the lower cover on the right side of your SunVault battery (the enclosure with LED lights on the front). Be sure to put the screws in a safe place as you'll need to reinstall them once your battery is turned off.

How do I turn off a battery?

Press the power button on the right battery for about three seconds until the blue LED lights on the batteries go dark, then replace the cover and secure the screws. If you have more than one, you'll only need to complete these steps for one of them. Turning off one will shut down all batteries in your system.

How do you replace a breaker on a sunvault battery?

Open the breaker cover by loosening the thumb screws on the right side of your SunVault battery (the enclosure with LED lights on the front). If they're too tight to loosen by hand, use a small flathead screwdriver. Turn off all breakers by pushing them down until they click, then replace the cover and secure the screws.

How do I Turn Off ESS inverter Breakers?

Turn off the ESS Inverter breakers found inside the Hub+ (the smaller SunVault enclosure) by moving the handles to the left. Leave all other breakers on unless directed otherwise by SunPower Support. Make sure the Microgrid Interconnect Device (MID) is in the left position.

How do I Turn Off the ESS inverter on my sunvault?

Locate the round switch on the left side of your SunVault and turn it about 90° to the left. Turn off the ESS Inverter breakers found inside the Hub+ (the smaller SunVault enclosure) by moving the handles to the left. Leave all other breakers on unless directed otherwise by SunPower Support.